Discussion Locked

Install network printer

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a PC's network running W98, so I want to install an IBM network printer (infoprint 1125).
via ethernet card(no parallel port).
When I try to do this in a step choosing the port
I choose "brose" to see the pinter, but I can't.
The printer has a TCP/IP and has a IP address.
If I ping the address, it work ok.

Thanks!!! for help

9 replies

by pelhan

Hi,

surely you have got a program with that printer. Something like virtual ports... install that on your w98 computer and tell the program ip address of that printer. If you will not be successful you can install that printer on NT/2000 server and use TCP/IP port. Than you can share the printer, and find it with "browse" option on your w98 computer.

regards,
Gregor

by nettek

In order to utilize direct TCP/IP printing in Win9x, you need special software installed on the client. I am not overly familiar with IBM printers, but the printer probably came with a CD-ROM that has some version of this software, and the documentation on how to configure it. If not, you need to download Infoprint 11xx and 122x Network Support v. 7.4 software for the IBM website. This will allow you to configure point-to-point printing in Windows 9x.

by pierrejamme

If you didn't get any software with the Print Server (Look on your Printer CD), you can try setting up local printer port lpt2: as a TCIP Port, configuring it with your IP #.

This discussion is closed to new replies.