Discussion Locked

Install new Cd-Rom Or repair Old one

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Need help on How to Install a new CD-Rom in windows 98SE , Gateway Select 600
or how to fix the one I have
thanks cevans

11 replies

by dmiles

Depending on what is meant by repairing,if it is not reading the disc you can purchase a lens cleaner kit from computer store to clean the lens or try a blast of compressed air,any thing other than this I would consider my general use before purchasing a new one a possible 52X for with considerration to how old the system is.

Installin a new one would require you to take off the computer case and flooow the directions of the installation per the instructions provided by manufacturer,the bios should detect pnp,you will then install the software from the cd that comes with the cd-rom.

by thechas

1 thing that I would add to dmiles answer is to remove the old CD drive from device manager before installing the new drive.

Boot up the PC and right click on the My Computer icon.

Select properties.

Click on the device manager tab.

Expand the CD drive branch.

Right click on the CD drive, and select remove.

Close device manager, and shut down the PC.

You should also unplug the power cord from the wall before swapping the CD drives.

Chas

by mark

You didn't mention the symptom. Never ask how to implement the assumed solution, give the problem first. If the drive is not showing up in My Computer, it could be the HD Controller driver instead of the drive itself. If it's having trouble reading disks, don't spend much time on it, cause they are too cheap. I would see it as an opportunity to upgrade to a CDRW or even a DVD-RW.

by phillips1

By the time you send it off to where ever to get it fixed, you would be better off buying a new one
I will more than likely be cheeper too.

This discussion is closed to new replies.