Discussion Locked

Intel Pro 10/100MB NIC with MAC 8.6

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I need to upgrade NIC (buildtin board NIC which is 10MB) to Intel 10/100 pro PCI card. The system is PowerMAC and OS 8.6 is running. I have installed the Intel NIC on PCI slot without an issue but the OS 8.6 doesn't seem like to know the new NIC. Any drivers I need to install?
What NIC actually should I use for this MAC?

Thanks in Advance.
Lint

3 replies

by lyon_bleu

The NIC should work without any additional drivers. Being an
Intel product, it's not likely that there will be much support for
its use on an Apple CPU. Here's a link that will help to find
more Mac-friendly NICs:

Launch Apple System Profiler [ASP] to verify that the card is
recognized in the pci slot. Depending on the model of the
PowerMac, there have been issues with which slot works for
which card, as well as which PCI specs are supported. Let us
know which model of Mac, and the advice could be more
specific.

by bheyman

You should go to the manufacture of the card's support
site and look for drivers and compatiblitty. I find that
asante cards are usually best in these old machines.
Did some one actually tell you that this card is
compatible? Also try to disable the apple enet
extension and use intel drivers if there are any.

This discussion is closed to new replies.