Discussion Locked

Intermittent Login Error

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello All.

Having a problem on a handful of 98 machines. We have a mixed bag of 98 and 2000 clients (mostly 98), with two win2k servers (1 as anti-virus control, 1 as accounting program machine, both running active directory) as well as a Netware4.2 server.

Problem is as follows: When logging into some of the 98 machines we get a "no domain server could be contacted..." error. We hit cancel, then try to login again, and it proceeds without a problem. The clients have the usual network settings:

Client for MS Networks
Client for Netware Networks
Dial up adapter
Linksys 10-100TX
IPX/SPX
TCP/IP

This seems to be random.

Thanks for any info.

Dennis Jones.

7 replies

by drinkin and thinkin

Sounds like it could be a Power Management issue. Check the Network Adapter properties in Device Manager and make sure "Allow the computer to turn off this device to save power" is not checked.

by ctmoore1998

The problem is that the workstation NIC can't negotitate the link speed before you are attempting to logon to the network, this is most often caused by a bad CATV cable, if you can wait a minute or two during the boot process (after the logon screencomes up) and log on consistently doing that then go to the adapter properties in Network Neighborhood and manually set the speed to 100 if it logs on fine then you are done if you continue to have intermittent connection problems set speed to 10 ifit works ok at 10 then you have to test the run and replace or repair the cable problem.

by sigmapi71

Which netware client do you have? MS Client for Netware or Novell Client? If Novell, ensure this is installed in IPX only mode. In this way you'll be sure IP is bound to only Client for Microsoft.
You can check it in Novell Client Properties right-clicking the red N in taskbar and looking in protocol preferences tab. If you see IP and IPX reinstall the Novell Client choosing IPX only.
Let me know

This discussion is closed to new replies.