Discussion Locked

IP Addressing

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Could someone please explain to me what "public addressing" is and what the difference is. Im talking about IP addressing for a Windows NT Server and clients.

6 replies

by jstocker

Public addresses are ones that are valid and routable on the internet and private IP addresses are those reserved for private use. Any address that begins with a 10 or any address beginning with 192.168 are considered private because they cannot be used and will not route on the internet. Hope this helps.
Joe Stocker

by mpdcsup

Actually, there is another block too (the class B) so the list looks like this:

10.0.0.0 - 10.255.255.255 (10/8 prefix)
172.16.0.0 - 172.31.255.255 (172.16/12 prefix)
192.168.0.0 - 192.168.255.255 (192.168/16 prefix)

A pretty clear description of public addressing is:

Category 3: hosts that need network layer access outside the
enterprise (provided via IP connectivity); hosts in
the last category require IP addresses that are
globally unambiguous.

All of this come directly out of RFC 1918, which you can study here:

http://www.faqs.org/rfcs/rfc1918.html

There is more detail than you'll need.

This discussion is closed to new replies.