Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I just got my ethernet working on my new motherboard, turns out that my PCI cards are causing my ethernet to stop working. I have a 5 port USB hub and a GeForce MX4000 128MB card. My question is why does this cause my ethernet to stop working and is there anyway around this? I tried changing the IRQ settings in my bios to 5 different values and everytime was the same issue.
2 replies
by bobbyglitter9 Accepted solution
Clarifications
by thechas Accepted solution
Despite being a "Plug-and-Play" bus, the PCI bus controllers often have problems dealing with some device configurations.
You best work-around is to move the PCI cards to different slots. Sometimes, even just swapping the order of cards makes a big difference.
What happens is that some cards are configured as if there will never be another high level controller card on the PCI bus. They work fine alone, but do not play well with other PCI cards.
Chas
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
0 helpful
15 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply
0 helpful
2 replies
0 helpful
10 replies
Question Unanswered
i need help in transferring my bulk emlx files
0 helpful
0 replies