4 replies
by tiascd Accepted solution
by retro77 Accepted solution
by oh smeg Accepted solution
Quite often with the NB's they turn off the Monitor when connected to a external Monitor or Docking Station.
Failing that try reading the Owners Manual for a solution if you have lost yours you can get a copy from here
As the monitor is actually working you have a straight Hardware issue with something killing off the Monitor as the system starts
Col
by zlitocook Accepted solution
Yes please go to maker?s web site and down load the manual, it may help with the laptop screen. But have you tried the FN and CRT/F8 buttons? With the computer on press the FN key and the F8 key once, this moves the display to the external monitor. Press it again and it moves it back to the laptop, and once more to move it to both.
You can right click an open area of the desk to get to the display properties. This will let you set screen size, back grounds and allot of other stuff.
I would also check the FAQ's on the maker?s site about known problems
This discussion is closed to new replies.
Trending Laptops Forum posts
Sort by Trending