4 replies
by chitosunday
No connection with bad battery as the computer uses the default setting or ask you set it up during your initial boot.
If you cannot find your drive C, either your harddisk is out of order or you are infected with a virus. Try scanning your computer with anti-virus using dos mode. If it cannot scan drive C. Try using fdisk and format it again. Then reinstall your OS and application. If this fail, turn off your computer try opening your computer and see if the harddisk cables are connected properly. If connected, you have to buy a new hard disk.
by tech_wiz03
Go to your bios first! Make sure that you harddisk is being recognized by the bios.
Next make sure the correct harddisk is being recognized, and that the harddisk is securely cabled.
since you are talking about boot disk to safemode I am presumeing that it won't boot to harddisk even for safe mode. This can happen if the partition table has been damaged or corrupted, the partition itself has been changed ie repartitioned using fdisk or other repartitioning software or the harddisk itself has been damaged.
More info would be nice.
rick
by jfortin1
by wlbowers
The startup disk did boot the computer that's why you got the a: prompt.
Boot the machine and press F8 every second or so till the menu comes up and select safe mode. Leave the floppy out.
Good Luck Lee
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending