Hi,
Although I can accept that a mapped drive may not be properly connected and thus cause your app to fail, that does not hold true for a unc path. As long as comms are ok (which if your user is logging on to a domain almost certainly is the case) then the unc path should succeed. I'd be interested in seeing the setup in question, but as that isn't going to happen try this workaround.
I don't know how the drive is being mapped - login script etc, so I'll assume it's something we need todo here. Create a batch file along the lines of -
rem delete any Z mapping that already exists
net use Z: /d /y
rem map \ remap the drive
net use Z: \\myserver\myshare persistent:no
:loop
rem check to see if the mapping was succssful, ifrem not keep rechecking by looping
if not exist \\myserver\myshare\myapplication.exe goto loop
rem if we get here then the mapping was successful
start \\myserver\myshare\myapplication.exe
exit
Drop the batch file into the startup folder instead of the ?shortcut? that you are using. If you have sleep.exe from the reskit then you can use that to make the script pause a while between checks during the loop. You could also add a counter that increments every time a check is made, and if there's no success after a certain number have an error message displayed to the suer telling them that you were unable to map the drive and to seek tech support. Hope this helps...