Discussion Locked

loss Red Colour on monitor

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I Have a digital monitor 15", and it has loss red colour even i try on different pc, otherwise at OSD menu the red colour is noproblem.

So what the problem? is the cable or else?
It's there any monitor cable software check or calibration software?

hx

7 replies

by mjd420nova

If the red appears on the start up screen but not on normal display, the cable may be faulty. Try another monitor or try the questionable one on another unit.

by luiss

TEKCO,

NO SUCH THING AS A SOFTWARE TO CHECK MONITOR CABLES. NOWADAYS THOSE CABLES HAVE BECOME LESS EXPENSIVE.

DROP ME AN EMAIL, TELL ME IF YOU'RE INTERESTED IN THEM. I MAKE THEM HERE IN NEW JERSEY.

LUIS
LUISS@ARCHTECH.NET

by choppit

The presence of red on the OSD suggests that the fault lies on the input to the monitor, most likely the cable, but my best guess would be bent/broken/shorted pins on the VGA connector. Assuming the pin(s) are not broken the best way to fix this is to carefully straighten them with a pair pliers.

by choppit

A quick visual check should be sufficient to determine if this is the case. Count the pins and check that they all stand straight.

by luiss

I agree, visual check should be enough. There is no way you can crack any of the conductors unless you actually cut the wires.

bye

This discussion is closed to new replies.