11 replies
by jdolvin Accepted solution
by bcpgm Accepted solution
I?d recommend a manual System Restore.
As always, backup data by connecting to a different system before you do it.
by bcpgm Accepted solution
by jdolvin Accepted solution
I don't know how to tell if I
have an OEM system or other. Any
way to tell ?
by bcpgm Accepted solution
If Windows XP Pro came with your system, it's likely an OEM Edition. It could be a Corporate Edition too.
If the Windows CD came in a tri-fold cover, it is likely a Retail full or upgrade version.
If you have the Windows CD, read the label.
If it says it is for a new PC only, it is OEM.
by bcpgm Accepted solution
by bcpgm Accepted solution
I was hasty.
BartPE CD does not have any procedure to make Windows bootable on corrupted registry.
What I tried to say was that by using BartPE CD you can skip a lot of steps of the MS procedure.
Please post a reply if you'd like steps to follow.
by jdolvin Accepted solution
I have almost complete access
to the drive from this new xp on
another partition so I copied
the 5 hives from a not too
recent snapshot to the System
config directory. When I booted
the bad system it got only as
far as the "Please wait...
windows is starting up" and
stopped for a long while. About
a minute later the log-on screen
came up but I had no keyboard
control or mouse control to be
able to log-on. I waited a long
time but it was stalled. I have
not tried the BartPe method. I
have info on it to read. Today
I tried another restore point
earlier but got the same results
, it stalled at same point...
by bcpgm Accepted solution
by jdolvin Accepted solution
I tried safe mode just now and
got the same result-"Please wait
...followed much later with the
logon screen-no mouse or keyboard
control. Safe Mode was on all 4
corners of the screen though...
I made AVG Rescue floppies a while
back. Would those be of any help
? I also have NTFS4Dos the FreeDos
program on floppy that can read
and write to the partition if I
knew what to do to restore the
mouse and keyboard control on boot
up then work from there ?
by bcpgm Accepted solution
It appears now you have more than KB and mouse problem.
Boot the computer with a Windows 98 Startup disk and run
Fdisk /mbr
This discussion is closed to new replies.
Trending Junk posts
Sort by Trending