Question Locked

memory diagnostic tool in vista business

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

hi,

i have an asus notebook core 2 duo with 2gb ram running vista business. when i do the mem diag test i get the hardware eror message contact manufacturer.

if i run the test using any of the 1gb sticks on it's own then the test is fine...no errors.

what could be the problem, any suggestions?

thanks in advance.

3 replies

by oh smeg

But the most likely is that Firstly Vista isn't making a accurate Report of the RAM.

Secondly if more than 1 stick of RAM is in use and they where not bought at the same time from the same place and are of the same Make & Model you have a Timing Issue which is causing an imbalance and is showing up as a Fault.

If the System just Hangs and doesn't start [i]Not Likely here as you couldn't get into Vista to test[/i] you have a Faulty RAM Stick. However if Vista is unstable and either constantly Hanging or shutting down it is most likely a Tomming Issue between dissimilar RAM.

Instead of messing around inside of Windows where Errors Abound download yourself a copy of the Ultimate Boot CD from here

http://tinyurl.com/3jnpy

Make yourself a copy and boot off the Ultimate Boot CD to test your Hardware. It's far more accurate.

Col

This discussion is closed to new replies.