Discussion Locked

Microsoft file and print sharing

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Does the computer that has the resource i.e. printer attached to it have to be on for another PC to be able use the shared printer? If a boot-up password is installed on the PC that is sharing out the resource, will the other pc be able to use the resource on the PC with the boot-up password on? Thank you!

17 replies

by jcbohn

The PC with the printer attatched to it needs to be powered on for another sys to use any shared device. I do not know if it will work with the boot-up password or not but my guess would be that it will not work. In order to use a shared device ona peer to peer network the host system must be on and logged in to the network. Hope this helpes.

by earnest

Yes all pc have to be on and have os running for shared resource ie, attached printer, to print. No, as I understand your boot-up password, the shared resource is not available until the os is up on the pc with the resource.

by bill cassada

The PC must be on and the OS running. The OS is what handles the remote print jobs...if the PC is off there is no way for the print job to get to the printer because the remote PC won't "see" the printer. If you simply boot up to the BIOS password the NIC will show traffic, but will have no means to do anything with the job and will, of course, just ignore the traffic.

by n333arora

Dear,

The printer has attached to a pc, than the another pc is able to take print. There is no need of boot-up Password, but without boot-up password we cannot use the files of another PC.

by reygould

Yes the computer with the printer has to be up and running the O.S. for the other system to access the printer with file and printer sharing set up on it. monitor does`nt need to be on after login unless you`re using it for other work. hope this helps.

by rsears

Yes, the OS has to be booted for the resource to be accessible but, there does not have to be anyone logged on to the workstation.

by knave

The pc (printer attached)dosent have to be on. And it will still work with boot-up password on.

by doubledown

First Question: Yes, the computer must be powered on in order for another PC to use the shared resource.

Second Question: If there is just a password on the PC, that in and of itself will not prevent usage. However, if it is a BIOS password, and the resource PC is at the prompt for the BIOS password, then the resource WILL NOT be available. If you are running Windows NT and you are at the Ctrl-Alt-Del prompt to log on, then the resource WILL be available (even if you don't log in.) If you are running Windows 9x, and you are at a Windows logon prompt, then you can just hit ESC past it to ensure that the resource is available.

This discussion is closed to new replies.