Question Locked

miflash.com

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Has any member ever come across the miflash.com conundrum for trying to boot a discontinued laptop, the Tiny 6120?
Cheers,
Allan

4 replies

by seanferd

This link has information on fixing this error. http://www.mitacservice.com/visitor/...lt.asp?Src=ALL

From:
http://www.velocityreviews.com/forums/t198728-quotbios-cannot-find-miflashcomquot.html

A BIOS update is suggested.

Oh, crud. The main Mitac site is still there, but nothing relevant is extant.

Here's the README: ,br>
http://download.tulip.com/support/Topline/Bios/Old%20BIOS/8500pro/System/1.03/flashFAQ.txt

AHA! Here we go: Read this thread. At least one of the links is good. (Looks like the info you're looking for has been purged from the internet! Wow.)

http://mustekinfo.de/mitac/recover.htm
Try the recovery.zip here. When you run the bootable diskette, make absolutely sure that the installation files apply to that specific laptop.

http://www.orphanlaptops.com/mitac_bios.htm

If you do try to flash BIOS, back it up for recovery first.

edit:
Here is miflash.com itself:
http://download.tulip.com/support/Topline/Bios/Old%20BIOS/8500/

You may need to change directories for the appropriate model.
http://xs3.tcsh.tcc.edu.tw/~w1/driver/nb/mitac6120/doc/Firmware%20type.htm

Again, be careful flashing BIOS. If you aren't sure what you are doing, have it professionally done. Otherwise, you can totally brick the laptop.

by anyamount

I have found most of the info via another site, and when I followed the downloads and checked the miflash.com file in the command window, it appears to be empty. Has anyone else found this?
But will give the boot blocker a go...
Cheers for now
Allan

by anyamount

I have been told to run a recovery floppy which i think I may have somewhere, and let it run without seeing anything, until the drives stop their chatter, power off and back on. Will keep posted.
Allan

This discussion is closed to new replies.