2 replies
by aquaris
1- have the driver of the modem handy...ie in a known location..
2- Remove the modem...
from the Modem appelet in the control panel...
click it..
it will find no modem...and ask you, should it search...
allow the search..
it will query all your ports...and then should find a modem attached to one of the enabled ports..Note it down...
it will next ask you the location of driver..
specify it... it will find it ...and ask you should it install the modem...
naturually you should answer yes..
it will then list all the ports it found..
select the port which in the first place it identified on which the modem is installed...
install the driver...
and you are done..
you can check its correct installation..
by clicking the modem appelet in the control panel then running the diagnositc..
by
selecting...
and then clicking the more info button..
if every thing is Ok..
it will report as the responses...other wise it will simply show a blank..box..
hope it helps..
by pctech
Should the first answer not help you, I would shut down the computer and remove the modem and use the BIOS to disable the serial ports. Boot to Safe Mode and remove any reference to these ports and the modem in the Device Manager. Also uninstall any drivers for the modem. Reboot the computer to normal mode and check the Device Manager to see which IRQs are left available, hopefully 3 and/or 4 will be available. Shut down the computer and reinstall the modem and drivers and see if it works properly then. Should it not, try switching slots and avoid using the slot next to the AGP port.
You can email me if you need any assistance on this.
I hope this helps.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending