Discussion Locked

More than one IP address to nic card

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Somewhere I read about binding more than 1 IP address to nic card. Is this true? We have WAN that must use static IP's for tracking purposes. Mobile users are forced to change IP's each time they visit another location or network segment. Can I put more than one address on a card, and if so how?

8 replies

by ddiall

You don't give much detail about the OS and the NIC itself...

For *nix try something like this (assuming your interface is 'wan0'):

# ifconfig wan0:1 192.168.111.222 up

Verify the setup:

# ifconfig -a
# netstat -rn

For NT, open the Network control panel, go to Protocols | TCP/IP | Advanced and click on the [Add] button for the IP addresses box. From there it's easy...

by huvason

If it's NT then it's easy. Simply use the advanced tab as the other user said. A couple of notes though. If you need more that 5 addresses per nic, then you must manually edit the registry.

Also, if the NIC is on MS proxy server, then your outof luck. There is a bug in v2.0 that limits you to one IP address per nic. (you can always add another nic thiough).

This discussion is closed to new replies.