Discussion Locked

Moving exchange 5.5 to a new hardisk

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an exchange5.5 with 4G hardisk. Now, I bought 2 new 9G hardisk and a raid card. I would like to move the old exchange5.5 from the old 4G to the 2 new 9G. Should I use mirror with the 2 new 9G or raid5 with the 2 9G and 4G?
Besides, I can bear down time. Any good suggestion for this migration? how long will be the down time?

Thx

6 replies

by tony.colgrove

If you do Raid5 with the 3 drives you be left with a 8G Logical Drive. Mirroring the 2 9G makes more sense. You can then use the 4G for your swap file and temp files, etc. Then move your transaction logs and information stores to the mirrored drives.
With Exchange: more spindles (disks), dedicated spindles, more controllers= Faster I/O performance.

by mckaytech

I agree with Tony's answer that it would make most sense to mirror the new drives and use the 4gig drive as a standalone for transient data.

As far as actually moving the data, you have a couple of options but since you're probably going to want to have your OS on the mirrored partition, it would probably be best to do a server rebuild after doing a complete verified backup.

Put the drives the way you want them, install NT and apply the service packs, install Exchange and apply the service packs, run Exchange Optimizer to put the transaction and database files where you want them, and then do an on-line restore of the Exchange databases.

paul

by mckaytech

Oops! Forgot part of the answer. I've done this sort of procedure several times and the limiting factors are the size of the Information Store and the speed of your tape drive.

I usually plan on about an hour to build the server and an hour for each 4gig to migrate the data.

This discussion is closed to new replies.