Discussion Locked

Moving info between FAT32 and NTFS

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Moving info between FAT32 and NTFS
Help, I have all my old files on a hard drive with XP, NTFS and need to put them to another hard drive with '98SE, FAT32.
Anybody got any ideas ?
Tia
Pete

9 replies

by jschein

The link i posted will let you see the data from winnt (ntfs) on a 98 machine...

by wcp

Keep in mind that the NTFS sees FAT32 (or FAT16) and FAT32 does not see NTFS unless they are networked or by means of third party software.

If your XP NTFS HD is bootable, the easiest way is to connect the 98SE FAT32 HD to the computer physically (say, as SLAVE). Boot to Windows XP and copy the files to the 98SE FAT32 HD. The transferred files will be in FAT32 not NTFS.

If your XP NTFS HD is not bootable, you need to connect both XP HD and 98SE HD to a computer with Windows 2K or XP. Then you copy the files to the 98SE HD.

If each XP HD and 98SE HD is in its own computer and bootable, you can network the two computers and then use map network drive to transfer the files. If you have no experience in this, then you should have a knowledgeable person to do the job.

by askerr

Please be advised that Windos 95,98,98SE and ME will not recognise NTFS This I understand is factual but to be sure check out Microsoft Update Site. I converted a drive to nfts and it created a lot of problems none of my other drives were happy about it I also understand that going to NFTS is a final step and that there is no going back But again check it out
Kindest Regards askerr
ps I have total 320Gigs Internal Hard Drives plus a 120 external usb drive

This discussion is closed to new replies.