Discussion Locked

multiple domains

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

we are small, school district that has four NT 4 servers running independently, but we can connect via TCP/IP and do some things.

However, because of some things we need to do, i want to assign drive letters to folders on each of the servers thatstaff from different schools can access easily. I just recently (yesterday) established one way trusts (their sites, trust ours), but would also like to establish a two way trust. To get it to work, i had to setup DNS and WINS telling the other servers to look at our server. I still need to complete the other half of the trust, but because WINS only has room enough for only two servers, i cannot figure out how to get our server to look to the other three servers. (Plus, we are going to be adding a few other schools so i will need to get this to work)

Can someone help me figure this out?

6 replies

by ronnonf

Here are two solutions:
Create two WINS servers one for each school. Have one server per school replicating to a centralized server. This server should contain all WINS entries from both servers. Set the centrallized server as the Secondary WINSserver.

A different way is to modify the LMHOSTS file. Be aware that this is static so any modifications made will need to get updated within the file as well. Add the #PRE entries within the LMHOSTS file to make sure the names get loaded whilethe machine is starting up.

by joshg

If your servers are connected via full time leased lines, you won't necessarily need DNS. I am not sure what you mean by "WINS only has room fro two servers" you should be able to add a multitude of servers to the WINS database. We currently connect 7 domains with two-way trusts using DHCP and WINS. Each domain runs its own WINS service so the registrations stay on the internal subnet. If you have permanent IP's for the servers then you won't need LMHOSTS just point the servers and workstations to the WINS server. Then setup the WINS servers as push/pull partners of each other.

This discussion is closed to new replies.