Discussion Locked

Multiple Tape Backup

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have just being assigned to configure our backup server so that it can use more than one tape drive. I have a Brightstor Arcserve Backup software and I have more than one SureStore DLT80 tape drives connected to different servers.
Is there any kind of connector(s) that I can use to connect all these drives together to the backup server? Please if there is, let me know the name.
How can I configure my backup server to use any of these tape drives automatically/ simultanoeusly?
All help towards solving this issue will be appreciated.

5 replies

by merckstepha

Thanks Subtropicalmist,
The situation here is that I already have 7 different Tape Drives and there is no budget right now to buy any new tape drive. If there is any kind of connector that can be used to connect all these drives together to a serve, it will solve my problem.

by hockeyist

Are they external to the server or installed internally?
Once the drives are physically connected together, Arcserve is easy to configure to allow the drives to be used sequentially or concurrently. You could even "RAID" them I believe. I haven't used Arcserve in a few years but remember that adding the drives was farly simple to do. Have a look at the manufacturers support site http://www3.ca.com/Solutions/ProductFamily.asp?ID=115

by hockeyist

...them. As long as they have unique scsi id's you shouldn't have a problem as long as you install the correct drivers. Are you able to do this?

This discussion is closed to new replies.