Question Locked

My CDwriter could not write only read

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My CDwriter in my HP pavilion could not write only read.

After writing programs/files the disc has no files no found.

Please help.

5 replies

by hal 9000

To see if you CD Drive will only recognise certain types of Media and use the better Brand Name Stuff like Verbatim or EMTEC blanks.

If the unit doesn't work on this media replace it with a new one that you can buy from any computer shop for a few dollars. Currently a CD Burner costs about $35.00 AU which should be around about $27.50 US.

All you need do is when you remove the existing CD Burner look at the positioning on the Jumper on the back of the drive and see if it's set to Master, Salve or Cable Select CS and then set the jumper on the replacement drive to the same setting and then plug in the drive. There should be up to 3 leads that need plugging in the one furtherest to the right will be a 4 wire Audio Lead and this is Optional if you are running XP in any of it's forms then a 40 Pin IDE lead that the red stripe on one side goes to the left hand side of the drive as you look at it from the Front & Top and then another 4 wire white plug that is the Power Lead, because of the way that this plug is made with bevels on the top corners it can only be fitted one way. Then make sure the the unit is mounted tightly and startup the system and you should have a working CD Burner again that will use all the currently available Media.

Col

by bugz0ph

Thank's Col for reply.

My CD Burner is built-in from my HP Pavilion ze5300. I could maybe replace it soon but i need first to back up my files by burning/writing all of them.

Do you think the problem has a relation to my windows updates? Or is that only about hardware?

Do you think that my cd burner is not a good quality? but it is HP ...

I am thinking of re-installing my windows... or even format my hard drive then install windows again.. would it resolve the problem?

I need your reply again. God bless.

Bugz

by hal 9000

That the burned can not be changed. But you do need a Slim Line Replacement Burner and you'll most likely find a DVD Burner a better preposition as well.

If the unit can not write to different media you can try downloading and installing the drivers from here

http://tinyurl.com/wgq4m

Though personally I would be looking at one of the cheap IDE HDD and a USB Caddy with it's own power pack to save your data to as they are cheap and really easy to work with a 3.5 inch 200 GIG Seagate Drive & USB Caddy today cost me $135.00 AU. The only thing that you have to do when you assemble this together and connect to the NB is to allow the USB Drivers to be loaded and then open the Computer Management and Format the HDD then you can just copy your data straight to it much faster and generally speaking far more reliably that any CD Media can ever hope to be.

The entire thing takes about 2 minutes to assemble as it's all just plug in the HDD and them slip the USB Caddy together and then plug in the Power Pack and USB Lead.

You can by the pre built units but then you generally pay far more for a smaller HDD though it does come formatted but thats only a few clicks of the mouse to accomplish so I don't bother and with the ease of removing the HDD should it become necessary you are not running into possible problems with Lost Data or broken USB to IDE Interfaces.

To find out how to dismantle the NB and replace the CD Burner look at the service Manual listed here

http://tinyurl.com/y77687

Col

by hal 9000

If you format the drive you loose the data, But a Repair Install may not hurt, if you follow the directions here you'll be able to get the same results without reinstalling the OS

http://tinyurl.com/g4bv8

As for HP [i]Hardly Piratical[/i] what you have to remember is that they buy the cheapest parts possible to sell a cheap computer, there is nothing wrong with that provided you are not relying on it for Mission Critical Work as they do break far more often than some other brands that are available and they certainly are not up the the build quality of the Clevo Kit NB's that are so freely available though to be honest the Clevo's are generally far more expensive for a non ruggerised NB compared to HP, Dell or the like.

NB by their very nature are fragile beasts and need to be treated as such as they do break far too often and are very expensive to repair when you have propriety parts involved.

If this unit is still UG then buy a USB Caddy and IDE Drive and backup all your data then return it for Guarantee work to have the thing repaired though to be honest they will first wipe the drive reinstall the original OS and then if it still doesn't work will start looking at replacing parts, so you need your data Backed Up Prior to sending in any computer for Guarantee Repair.

Col

This discussion is closed to new replies.