4 replies
by stratoudakisg Accepted solution
by hal 9000 Accepted solution
M'Board drivers is crippling the SATA Driver and killing off the ability to use the SATA Drive.
You should only need to install the extra features that are not supported by Windows and to do this you really should go into the Computer Management and look up devices and only update what is not working correctly on the M'Board.
Col
by stratoudakisg Accepted solution
by hal 9000 Accepted solution
The different drive makers have their own testing utilities and these should be used to check the HDD. If it fails the test you need to test it again in a Known Good computer or M'Board and if it again fails the test the HDD is shot. If it passes the test on the second M'Board the M'Board on the original computer has a faulty HDD Controller and the M'Board is faulty.
You should be able to find the correct Test Utility at your HDD Makers Web Site or if you are unable to find your HDD maker any longer you can use the Seagate Utility called Seatools to test the HDD.
Col
This discussion is closed to new replies.
Trending Storage posts
Sort by Trending