Discussion Locked

NCD Explora 451 and Solaris 8 x86 Server

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Hello, I have bought a NCD Explora 451 (http://www.ncd.com/products/hardware/explora/400ds.html for details) through an auction. I want to connect it to my home server running Solaris 8 x86 and get the Solaris graphical login screen. I read that Explora can do XDMCP and DHCP which is the same way my X-window emulator (running under windows 98) uses to connect to the Solaris box. I would like to khow how to get the same thing with the Explora.

3 replies

by william shipway

Haven't used the explora, but just reading that page suggests that you need a couple of things to start with.

You mentioned DHCP - a DHCP server is required to allocate an IP address to the explora. Your Win98 manchine may use DHCP but probably has an address manually configured. Anyway you need a DHCP server and in your case it needs to be the Solaris 8 box. Have a look at the man page for "dhcpconfig" if you are not already running a DHCP server.

Once that's done, you need an Xwindows environment running on the Sol8 machine. Sounds like it might be already, if you connect from Win98, but if not, see the man page for "X" to begin.

Then it's all ready. Plug in the explora and set up the X terminal environment. Use the IP address or DNS name of the Sol8 box to connect and log in.

HTH
William

This discussion is closed to new replies.