Security

Ask something
Discussion Locked

NetGear RT314

0 helpful
4 replies

by borg7of9

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I just installed a netgear RT314 router. I would like to know if I can keep a port open on all my network rather than by IP address. For example I want to keep ports open on many systems to run MIRC but from what I see I have to do this by IP address which would use up the 12 menu settings I have.

Also , how would I set up a DMZ for a more than one system. I would appreciate detailed answers or if you dont know, ddirect me to a good site that can help ( I have not found good information on netgears site) For some one who can give me a detailed correct answer, I will up the points!!!!!

Thanks

4 replies

by servermonkey

Instead of an ip address, try 192.168.1.0/24 (or whatever you ip scheme is) for a 255.255.255.0 mask. the 0/24 tells the router that it has a 24 bit subnet mask (11111111.11111111.11111111.00000000).

You can have as many systems in a DMZ as you desire. Think of it as another network that you can afford to comprimised.

by borg7of9

I know the theory, I wanted to know how to set the config on this specific router, thanks anyway

This discussion is closed to new replies.