Software

Ask something
Discussion Locked

Netmeeting

0 helpful
4 replies

by del smith

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Trying to use Netmeeting to connect to an internal ILS server. I get the message is Netmeeting that says "Netmeeting could not find this computer on your network. Check to make sure the address is correct or change the address type in the Using box." Any help that resolves this problem is worth 3000 points.

4 replies

by Member 30576776

I assume that you have double-checked the ILS name that you entered in the using box. I also assume that other client machines can connect to the ILS box. I would ping the ILS box to determine if you can reach it. This should eliminate WINS/DNS and basic network problems on the client end. Check your router(s)/switch(es) and internal firewalls to determine if NetMeeting traffic will pass through it(check your documentation for port numbers). If you are running the older client, be sure that TCP/IP is selected as the communication protocol. Hope this helps.

by del smith

I appreciate you trying. I have done all those things are they all test out fine. Do you know where the "Usage" option is that it is referring to?

This discussion is closed to new replies.