Discussion Locked

Netmeeting Error message

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I receive an error message when I try to remote control a computer on my lan

Failed to establish an authenticated connection to the person you called is the error message that I receive pls. help

3 replies

by buzz70_98

First you need to check if you have proper connection by pinging. If you do, make sure that you got the proper computer name. One thing to try is putting in the ip address of the machine. If all that fails, u might want to reconsider reinstallingnetmeeting.

by bigballine1

We can start netmeeting from Nt workstations and win 98 client machines when we try to connect from a win2k machine we receive the message

by troydt

If you are using the "remote desktop sharing" feature, then you need to enable security. The error message seems to imply the secure mode isn't kicking in. Try this:

First, in Netmeeting pick Call/New Call. Enter the IP address or name of the target machine, select "Network" from the Using box, and CHECK the "Require Security for this call" checkbox.

If that fails, then you should try removing and reinstalling NetMeeting on your PC _while logged on as the user who will be doing the connection_. An annoying quirk of the "secure" mode is that the security "key" only gets built during installation, and it only gets built for the person who INSTALLS Netmeeting (at least, this is what NT 4.0 did).

Last ditch: is IP working on that Win2K box? Does a "normal" Netmeeting work?

And if you're just going for remote access, try VNC available at http://www.uk.research.att.com/vnc/ : it's VERY lightweight, and works great in my tests thus far. And it's GPLd!

This discussion is closed to new replies.