Discussion Locked

Netsh invalid address name

0 helpful
0 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

How to use NETSH when "local area connection" / address name is invalid?

netsh -f file.txt
issues a msg "invalid interface"

netsh -c ...... > file.txt created the lines below:
#========================
# Interface configuration
#========================
pushd interface

reset all

popd
# End of interface configuration

# ----------------------------------
# Interface IP Configuration
# ----------------------------------
pushd interface ip

# Interface IP Configuration for "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}"

set address name = "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}" source = static addr = oct1.oct2.xxx.121 mask = 255.255.255.0
set address name = "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}" gateway = oct1.oct2.xxx.1 gwmetric = 1
set dns name = "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}" source = static addr = oct1.oct2.y.100
add dns name = "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}" addr = oct1.oct2.z.100
set wins name = "{CE5BED69-35DA-4456-B5CE-2F16B5BC97F9}" source = static addr = none

popd
# End of interface IP configuration

0 replies

No replies were posted before this discussion closed.

This discussion is closed to new replies.