Question Locked

Network Engineer

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

could you please help me ,

i have to setup small network for around 90 users, i am using 2 switches, i want to know how can i give connection between two switches to start both switches connected in one network

6 replies

by maniacman

Tomorrow you'll come back and ask us how to setup a PIX firewall, so what do you expect us to answer?

by boxfiddler Hot topic

you'll tippety tap your fingers to the bone answering these day in and day out. :)

by sridhar_reddapani

Simplest answer is ...
check is there any interconnection ports available at the back of the switch if so use them.
If not connect any port from first switch to any port in second switch through a Ethernet cable, But it makes network slow as computers from one switch to another share same single link bandwidth.

by kokophone

hay u will need which network type u wanna do...
peer to peer ??or server base....

by arnoldsaudio

If I'm understanding you correctly, then what you need to do is just connect the second switch to one of the first LAN ports on the first switch. If this netowrk has internet access, I would connect the modem to the first port on the first switch, and then connect the second swtich the the second port on the first switch. after that, the two switches should act as one and there should (***KEY WORD "SHOULD"***) be no problems from there on out. I myself run my modem to a hardware firewall, then to a gateway pc to host my internet (the gateway is running Linux), then to a switch, then to my wireless router from my second switch port. Please contact me if this works or if you need any other help.

This discussion is closed to new replies.