Discussion Locked

network neighborhood fails

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a client that has a peer to peer network with 98, 2000, and me. The problem is that network neighborhood quits functioning and suddenly starts functioning again. During the time that network neighborhood is not functioning all of his mappeddrives work. Also, he sometimes has off and on slow file transfers.

I have reset the 10/100 switch and it may start to function and may not.

I am of the mind that I have a bad nic, but I'm not sure how I can test them. The customer has ADSL router uplinked to a 16 port 10/100 switch.

6 replies

by rabbit_runner

This sounds like a 'browsing' problem. Two or more of the computers on the network, think they are a 'master browser'. Your mapped network drives still work, probably because you have WINS or using NetBeui. Check MS KB for an article which will explain how to turn on / off 'browsing master' on each of your systems.

by jemsites

Ity is not the master browser settings. This an intermittent problem. Sometimes it won't work with two PC's up and sometimes it is working in the morning, but not in the afternoon.

Also, some of the PC'"s running free zone alarm.

Any responses would be appreciated.

by phil

This is just a shot in the dark but something to try would be disabling the power management on the all of the pc's. also check in the device manager properties of the nic's themselves, sometimes they have a feature there that will allow the nic to go to sleep if not used for a certain period of time. To see if it's a bad nic, next time the network is down check the switch to see which lights are off. Also, if you have the resources, try a different switch. These are just somethings to try.

Good Luck

This discussion is closed to new replies.