Discussion Locked

network/WAN problems

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Feeling really stupid...
Anyone running a small business network out there may know something about this; running an 8 station network 7 clients one server. Win 2000 pro for the OS on all. Using SMC NAT router for moving 4 static IPs (cable modem to WAN port on Router) to various stations for use with Terminal Services as client.
PROBLEM: Apparently, synchronization between modem and router is lost on a daily basis; I can ping out to DNS , but connot browse the net. Network maintains fine. Tried replacing the router, new cables, checked config until the cows came home--still the same problem. Getting the runaround between the cable provider and the router folks--just no results . Any help would be greatly appreciated. Note: the current network config was operating faultlessly for about 6 months before this problem started

4 replies

by oz_media

Strange to me but who am I anyhow.

I would look into your cable providers servers. It may be an issue THEM using DHCP and YOUR NAT. I ran into a similar problem when I used a new router that came reconfigured with NAT. I removed the translation and pointed it to the Netware server for NAT through.

by Member 32001153

You state you lose synchronization between modem and router. If the link between the modem and the router is lost, the connection is dead and you cannot get to anything outside so perhaps this statement is not corrent.

Please answer the following:
Are you running DNS on the Internal LAN?
Is Active Directory installed?
Do you have separate internal and external domains? internal.domain.com and domain.com
Are the static IPs you refer to being addressed directly to computers beind the firewall as if they were in a DMZ so public addressing is present on the computers or are you mapping them through the router from public addressing to private addressing?
What is the primary and secondary DNS mappings for the clients? I don't need the addressing, just if they're internal DNS servers or external and which is which.

This discussion is closed to new replies.