Networked Printing So Slow!
With 5 PC's on a Windows 98 'shared connection' hub network, printing to the shared printers is so slow compared to direct printing.
Any settings, tweaks, or software add-ins I need to be aware of?
IT Employment
With 5 PC's on a Windows 98 'shared connection' hub network, printing to the shared printers is so slow compared to direct printing.
Any settings, tweaks, or software add-ins I need to be aware of?
by nichomach
Is it shared off one of the PCs or does it hang off a printer server?
What model printer is it? Are you using the full on drivers with bidirectional support, or just basic PCL/PS drivers?
by ericwi
by pkust
You say printing is slow. What about accessing file shares on the network?
Some things to check:
1. Are browser elections happening frequently? Five Win98 machines for the network means all the systems are approximately equal on the network--any one of them has the potential to be the master browser for the domain/workgroup. If browser elections are frequent, a lot of network traffic is being generated that doesn't serve an actual user task (i.e., print, file sharing, et cetera).
2.Are your NICs set to 100Mbs Full Duplex or 10Mbs half duplex? Unless a network card simply won't work on a full duplex setting, full duplex is generally preferable, as it allows better throughput.
3. If your network protocol is TCP/IP (likely but not mandatory in a Win98 network), is your subnet mask appropriate for the addresses being used? Most importantly, be sure you are not using the network or broadcast IP address (first and last address in an IP subnet, respectively) for any workstation--this will generate broadcast storms and other garbage traffic, and will slow network performance significantly.
Network printing in Windows 98 should not be that much slower than network printing, as a rule, even with default settings on the printer shares. Although the symptoms appear to focus on printing, I would tend to suspect network configuration more than I would the print sharing setup.
Hope this helps. Feel free to e-mail if your problem persists.
Cordially,
Peter Nayland Kust
TEKMedia Communications
pkust@tekmedia.com
http://www.tekmedia.com
by rmiller
by neje
This discussion is closed to new replies.
Sort by Trending