networking

You disconnect the current DSL Modem and plug in the new DSL Router and connect up but [b]Do Not[/b] use the USB Connection yet.

With the supplied CAT5 cable connect the NB to the Router and first setup the router with your proper user name & password for your ISP and whatever else they require. This will be told to you in the Manual that comes with the DSL WiFi Router and your ISP who will have the User Name Password and other settings. Once you have correctly configured the DSL WiFi Router and it's working correctly you can remove the CAT 5 Cable from the NB and connect the desktop with the USB Cable and then use the NB to Log in through the WiFi Access Point.

Remember to instigate the recommended security in the users manual though as you do not want an open WiFi connection that others can use to access the Internet and do things that are illegal where you live as you will be held libel for any illegal downloads if you leave the WiFi Access Point unsecured.

You will also be libel for any excess usage charges that get racked up on your ISP Account as well so this is more reason to secure the thing down.

Col

Some modems have both RJ-45 ethernet and USB ports. If your modem does you should be able to conect the router to the modem using the RJ-45 port.

If it does not contact your cable ISP provider and tell them you want to exchange the cable modem for a model that does.

Most providers will be accomodating.

Just explain to them you have purchased a new notebook and you want to connect to internet connection through the wireless router.

Make sure you specify that you need an RJ-45 port on the router as you want to connect your own wireless router / firewall.

Once you have a replacement modem, install the router using a wired connection first. You can use the desktop or notebook, it doesn't matter. It is best to ensure the router is configured properly for the ISP connection before trying to configure the wireless setup on the router.