Question Locked

New Build PC - Powers up but no post???

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please can someone shed some light on my problem. I have just built a new PC.

C2D E6300
Asrock 4 Core Dual VSTA Motherboard
2 Gb DDR 400
Xpert Vision X1600 Pro AGP Graphics Card

With this all put together I turn it on. Fans all spinning (PSU,GPU and CPU)
Initially the keyboard lights flash once, then thats it PC won't go into post.
I have looked all over the net for help and can't find anything that has worked.

Please Help. Many Thanks.

5 replies

by mjd420nova

I can't count how many times I've seen this on new builds. Does the MOBO require and insulating washers on the underside? I always use plastic or nylon standoffs to prevent shorting of the MOBO on the standoffs. Does the video card require another power connection from the power supply directly to the video card? This is a requirement for all the upper level cards. The video card has to be the first device to start, displaying its BIOS on the screen, then the MOBO/CPU BIOS and memory count after that. Another fault is not having the connector to the MOBO correct. I've seen many different types, ATX, 20 pin and 24 pin connectors that don't match up with what the power supply has. Good luck, hope I was able to help.

by adb2011

I have tried all this a few times now. I took it to someone else who told me it was the motherboard. So I bought another mobo. New mobo (same model) does exactly the same thing. Do you think my processor got damaged when my old PSU died? I tried different (working) memory without success. I am unable to test the processor so its looking like I need to buy a new one although I am reluctant to do this at the moment incase it could be something else. Is there anyway of telling if the processor is damaged without installing in a working machine?

by maniacman

I know, because I myself have forgotten to plug it in many times and got the results you got. Fans spin up, but no POST. Check to make sure all power cables are in and that your MOBO is not shorted to something else.

by thechas

Just to add to what has been posted.

Many motherboards ship with the clear CMOS jumper set to clear, and do not POST.

Move the jumper to the normal position and all should be well.

If the jumper is in the normal position, try clearing the CMOS, it may correct your problem.

Also, some hard drives will stop the POST process if the jumpers are set wrong.

Chas

This discussion is closed to new replies.