Discussion Locked

New to UNIX How2 setup xterm NT w/KEA

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am a new UNIX user. I access a HP-UX server via NT 4 Workstation using KEA TELNET terminal emulator. I need simple, cookbook instructions for setting up X Window session.
I do not have access to manuals, except online with the MAN command. I do have the TchRepublic UNIX command cheatsheet, and can do most basic functions.

5 replies

by ryttinch

You will need to set up an X server on your NT workstation. I use Hummingbird Exceed, but have also used Netmanage Chamilian and xwin32. Once you have this set up on your NT box (and running), you will have to set the DISPLAY environment variable. You will then be able to run any x program from your telnet session.

Another more inexpensive alternative would be to install VNC on your windows machine and your unix server.

Hope this helps,

Chad Rytting

by btidwell

Another cheap x-server is MIX from www.microimages.com. It's only $25 for a Windows platform and there is a trial period. Once installed you set your DISPLAY variable as noted, such as

DISPLAY=pcname.domain.com:0.0
export DISPLAY

Look in network identification for the computername on your PC.

Do this on the unix side with your telnet connection.

Then start up your x-server program.

From the telnet connection start up a x program, such as xterm. It should come up in the xwindow.

This discussion is closed to new replies.