If this is a Ghosted Image is it from an identical PC. * Have you tested the Drive for defects. If it isnt from the same PC you may have Hardware Abstraction Layer issues.
Insert your XP CD and when you see ?Press any key to boot from CD? press a key. Now wait for the XP installer to finish loading up and you will be presented with the option to press R to Repair.
Press R.
The next screen will ask you which Windows installation you would like to log on to. Normally the following will be listed:
1: C:\WINDOWS
Press 1, then Enter to continue.
You may now be asked for the Administrator password. If you know this type it and press Enter. If you don't know the Administrators password it may be blank. Just press Enter or type your username and password.
At the command prompt type:
chkdsk /r
Let it run through the 5 stages.
fixmbr and press Enter
fixboot and press Enter
Wait until you are returned to the Recovery Console. Restart the PC and see what happens.
* You can use the Hard Drive Makers Testing Utility to Test the Drive
Hitachi / IBM - DFT "Drive Fitness Test"
http://www.hgst.com/hdd/support/download.htm
Works with all manufacturers
Western Digital "Data Lifeguard"
http://support.wdc.com/download/index.asp#dlgtools Works with WD drives only
Fujitsu "FJDT"
http://www.fel.fujitsu.com/home/drivers.asp?L=en&CID=1
Works with fujitsu models only
Samsung "hutil"
How to Troubleshoot Windows 2000 Hardware Abstraction Layer Issues
http://support.microsoft.com/kb/237556/en-us
http://www.samsung.com/Products/Hard...ties/hutil.htm
Compatability unknown...
Seagate "Seatools"
http://www.seagate.com/support/seatools
Works with Seagate drives only