Discussion Locked

now you see it now you don't......

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I can access my web site running on a win2k system when i enter the static IP address in a browser on a stand alone computer with a normal dial up connection, but I can't access the site when i type in its full domain name( I keep getting an "Under Construction, The server you were trying to reach does not currently have a default page....." message) I get this same message when i try to access the system from one of the PCs on my local LAN. I've a feeling it's down to my DNS settings, but i've already had these registered with my domain name service provider. if anyone has any other ideas they'd be well appreciated.

Thanks in advance......

3 replies

by ann777

You are correct: if your website is available using its IP address, but not using its name, it does means there is a problem with the Domain Name Server. The DNS should be translating names into numeric addresses.

Are your LAN workstations using a fixed ip address? If no, then you have to make sure that whatever device that is handing out ip addresses (whichever device that is acting as a DHCP server? -- usually a router or another server) is being used as the gateway on every workstation. In other words, the router's ip address should be your workstations DNS.

I am assuming that you are using your own DNS and not an ISP's DNS. Normally, when you use a DNS located at your ISP, you connect to your ISP and the ISP passes to a router the address of the DNS. Each workstation on the LAN is configured with the IP address of the router for its DNS server. Every time a workstation requests a DNS translation the query is passed on to the router, which in turn passes it to the DNS server located at the ISP.

If the LAN computers get their addresses from the DHCP service of another server (such as a Windows NT Server) rather than receiving their addresses from the ISP router then the "DNS option" in the DHCP server must specify the address of the router.

by colin.mac

Thanks Anna, all i needed to do was wait for the DNS register to refresh at the service providers location. they normally do it twice a day which means everything is hunky dory this morning apart from my head !!!!

This discussion is closed to new replies.