Discussion Locked

NT Fails to detect my hard drives.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to install NT workstation on a Win98 machine and NT does not detect my 2 hard drives. I used Partition Magic 5 to create a FAT16 partition for NT and put it on the front of the hard drive. I would really like to get NT installed ASAP. IfI need another driver for my hard drives, where do I get it?

6 replies

by mckaytech

If you're using standard IDE hard drives and an embedded IDE controller on your motherboard, and NT really can't see your drives at all, that is worrisome and it is not a problem that a new driver is going to fix. It may be that your motherboard does not support NT - you might want to check the NT Hardware Compatibility List (HCL)or download Microsofts tool for testing hardware compatibility. Or you could see if the motherboard manufacturer has a BIOS upgrade.

If you're using SCSI drives, then you need to get the right driver for your controller from the controller manufacturer (e.g. Adaptec).

More likely, though, NT just doesn't like the boot record that PartitionMagic laid down and NT doesn't recognize the partition as opposed tonot recognizing the drives themselves. I'd be looking closely at the partition structure.

paul

by dmiles

You have WIN98 OS,NT will not detect the hard drive if you have enabled the FAT32,NT cannot recognize a fat32 partition.The obvious solution will be to consider the task of wiping the HD clean and using FDISK,then install nt workstation first ,then reinstall WIN98

by nichomach

The last answer is likely to land you in bother. You've already stated that the partition is FAT16. If it's more than 4GB this can create problems - I generally keep the boot partition for an NT box to around 2GB. Secondly, do not install 98 after NT, you'll lose the NT boot loader. Do it the other way around if you wish to dual boot; you'll then be given the choice of booting into NT or Win98. Never had a problem with Partition Magic, but there's always a first time. Good luck.

This discussion is closed to new replies.