Discussion Locked

nt server

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I try to connect to Win NT server but i got this error message when i try to logon network using win98 notebook although I've configure my ip address and other network setting in n/w neighbourhood same as the company network setting but i keep having ip address starting with...165, why is that so? By the way, I connect using one of the switch port. Is there a problem?

I tried many times to logon but keep having the same error.

11 replies

by sgt_shultz

can you ping the server? disconnect the laptop from the network, then can you ping the ip address you've set the laptop to? (to see if anyone has that address already...)
my guess is you are not getting a dhcp-assigned ip address. try changing yourtcpip settings on the win98 laptop to 'get an address automatically' then do a winipcfg /release /renew?
if you get the message 'no dhcp server' maybe you don't have a dhcp server setup on your network...
then make sure you can ping the server andthat you are not trying to use an ip address already in use somewhere else on the network. also check the gateway setting...

by ann777

If your network is not 165.x.x.x and you keep getting 165.254.x.x/255.255.0.0 then the computer is not "seeing" your network.

Check your network cable (link lights at both ends?) and check your network adaptor. Sounds like a cable connectionissue. Is the port on your switch "shared" with an uplink port? If you are using "uplink", then the shared port must not be used. See if a different port on the switch makes any difference in whether you get your LAN ip address (instead of WIndows' default 165.254.x.x).

by slowlearner

If your laptop was setup with a dial-up networking, so try to release all connection from your laptop before connect to your company network. (winipcfg /release all).

by motleykrue

this usually occurrs when yournic is set to dhcp but am not getting a ip.
is the port patched in ? is the speed on the nic set to the speed on the switch port ??
take the notebook to a port that is in use and patch it in there and see if you get an address.
is the correct driver loaded for the nic ?
can you ping the loopback address. 127.0.0.1 ??

This discussion is closed to new replies.