Discussion Locked

NT Workstation unable to access drive fr

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a network which has mostly WIN98 machines. I have setup a couple of machines with NT Workstation 4. I can not access these machines from the server or from my own PC. What is the correct way to set these machines up so that they are available for network share in network neighborhood?

12 replies

by ejsotillo

Hey Dave, you might want to check on those worksations if the shares in fact are "shared" and if you had been given permissions to view or access them, another thing could be that they user or the creator of the share placed an "$" at the end of thesame if that's the case you must remove that "$" from the share..try those..there could be 100 of things..

by davew43boss

This is partially helpful, although I was looking for a way to get my workstation available to complete network without adding all the shares.

by joetech3

First, be sure that you are a member of the local administrator group. After logging on, open my computer. Right click on the C drive, select properties. Go to the share tab. The default share is C$. If you want everyone to be able to access this, rename it without the $. If just admins are to access it, do not change it. Access it via UNC \\hostname\c$. You may also have to enable the DNS setting, if you have a DNS and a WINS server, on the WINS Address tab of the properties of TCP/IP on the protocol tab of network neighborhood properties. Without the servers, you will have to make a manual entry into all LMHOSTS files. Hope this helps.

by davew43boss

This helps although I do need the ability to connect all machines to this workstation. I was looking for a way to do this without adding all the users seperately.

Thanks

by elmagoal

You need registry key the allows hidden share AutoShareWks value = 1. And you have to add them to the domain as an administrator. network in control pannel and click on the change bottom. Entyer the domain name and check create computer account in the domain. Put admin name and password. If all your connections ar good you should join the domain.

by wburrows

I have found that when dealing with NT security its best to look at it from the machines point of view. A standalone NT workstation only has it's SAM for account data. If you are attempting to access the machine from the network it is going to validate the account against one in it's SAM. Simply creating an account with the same username and password as your domain account will allow you access into the machine. If you wish to have users in the domain access the workstations without creating account for everyone, merely have the workstations join the domain, the workstations can now check the domain SAM for validating users. The joining process will add the domain users group to the local users group and all domain users should now have access to the machine. From there create your shares and you should be all set.

by davew43boss

This gave a good example of how to setup shares although I still can not seem to get the workstation to join the domain properly. Could you explain this better?

Thanks,
Davew

by curlergirl

If you can't see the NT machines in Network Neighborhood and/or from the server, it may be that they simply haven't joined the domain properly or you haven't created a machine account for them in the domain. Make sure that you join the domain from the NT workstation end and, when doing so, click the check-box to create a machine account and type in the Administrator ID and password - this normally will allow you to see the NT machines in Network Neighborhood and will set them up with the administrative shares (C$, etc.). To access the administrative shares directly, you will have to be logged on with an domain administrator ID/password and map a drive to \\[computername]\C$ (and/or D$, etc., if you have other hard drives on the NTWS). If then you want to share certain folders, you have to share them from the individual NT machines so that they can be seen by double-clicking the computer name in NN. Also, follow and check all the other comments above about security. Hope this helps!

by davew43boss

This was the answer! I setup the workstation in the domain and now can see it and access from the network. Thank you,
DaveW

This discussion is closed to new replies.