Discussion Locked

Ofc2000 requires CD to make changes

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Am I beserk or did Microsoft do it to us (again)? I started a new job & inherited a stack of unidentified MSOfc CDs. When a user wants to make a simple change, the MS installer wants the original CD. Is there a way around this? How are you guys handling this?

13 replies

by dmiles

There are not many work arounds,when it comes to getting organized on a new job,try locating any back-up software or materials,that can be identified and then labeling and setting up a system to identify all material,a time consuming effort is to get a machine that can be used to load the disk and view contents.I donot think there is much of a work around to help.good luck on the new J.O.B.

by chrisa

You can always browse to a network share that has a copy of the cd to do any upgrades down the road (Not like Ofc97 where you had to edit the .stf file) Once you have steered it there is will find it on subsequent changes.

by dalpedog

You should also be able to revert back to dos, make a new directory call it Office2 or something like that. Use xcopy32 with the /s/e switches.

by kamdman

Those installs were done either from a network mapping which is no longer available or locally using the cd.
I suggest installing the cd to a network drive, map the user to that drive, and then running setup from that users system, which in turn will update the stf file.

by mdeans

I do a custom install, and manually select ALL possible options. It takes an extra moment or two... but is well worth it.

by rgarner

Off2K is designed to allow the installer to pick and choose the options to install, install on first use, or run from CD. The best fix is to uninstall Off2K from your computer. Have your network administrator install the suite to the server using an admin installation. Re-install from the network. New components are install automatically from the network installation.

This discussion is closed to new replies.