Discussion Locked

Only getting 16 colors

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I reloaded Win 98 and can only see 16 colors. What do I need to do to get high colors?

7 replies

by timwalsh

I'm assuming you are saying that 16 colors are your only choice, and you're not just asking how to change the color depth.

The color depth you can achieve is dependant on two things:

1. the capabilities of your graphics adapter (we'll assume that your graphics adapter is capable of more than 16 colors)

2. the installed graphics driver

Check your display properties to ensure that your graphics adapter is properly recognized by Windows and that the proper driver is installed.

Usually, if Windows cannot automatically determine what graphics adapter you have installed, it will install a very generic VGA driver.

To change this you normally have to uninstall the graphics adapter from the Device Manager. Then run the Add Hardware Wizard. Choose to specify the adapter rather than have Windows automatically find it. If your specific adapter is not listed in the Windows-supplioed list of drivers, you will need to specify "Have disk..." and tell the wizard where the properdriver for your adapter is located.

Once this is accomplished, and the proper driver successfully installs, you should be able to change your color depth.

Hope this helps.

by oz_media

If you're not sure which adapter is installed, (Windows System only reports what you told it to during install so if you didn't choose the right adapter, it installs a generic one) just open the box and the graphics card will have info on it somewhere. If it is a game card or popular card, it will generally have all the info right on the board or a sticker on the board. If not, look at the chipset and see if there is a company name or chip name. From there you should be able to download the driver from the manufaturer, with older cards you may need to visit driverguide.com
Login name: drivers
Password: all

If you

by thechas

You need to install some system drivers and software.

The default drivers in W98 do not function well for many systems.

I install drivers in the following order:

Motherboard / chip-set driver.
(very important for AGP cards)
If you do not know what motherboard you have, check out the ID tools at www.motherboards.org
or www.wimsbios.com

DirectX (from Microsoft) I recommend installing the latest version specifically supported by the video card driver.

Video card driver (download the latest from the mfg)

Then if needed, the driver for your monitor.

Chas

by fred07

If you formated your HD then you need to install the MB drivers from the MB disk or download from the MB mfg web site.
If you are using an onboard video card and onboard sound, Those drivers are incorporaated on the Mother Board drivers cd. If separate wideo card you need the cards mfg install disk which should be on their web site for download. Ditto for the sound card.
Hope this helps

by pierrejamme

Additional comment on Chas comments. If it is a PCI card you may not have the "PCI Bus" correctly installed. Check device manager (right mouse click MyComputer and click properties, device mgr is second tab)for any yellow exclamation marks.
You will need motherboard chipset drivers for PCI Bus install.

This discussion is closed to new replies.