Discussion Locked

overclocking older bm systems

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Do you have any helpful info for me to overclock an old pentium 1 ibm computer?

1 reply

by thechas

I assume that you are referring to Socket 7 based systems.

Most of these motherboards used jumpers to set the buss speed and multiplier.

As a general rule, Intel CPUs are less forgiving on clock speed than AMD CPUs.

The speed of your RAM isgoing to be the limiting factor for buss speed.
You need 60 nS RAM to support a 66MHz buss speed.
Faster RAM will be needed (and hard to find in SIMMs) for a faster buss speed.

You can often get the PC to run at 5 - 10% over rated CPU speed.
Beyond that, you need to tweak the CPU core voltage to get the system to operate stably.

My first thought, is why do you even want to try this?
You can get 350MHz PII systems for under $100.

A good upgrade would be to find a super socket 7 motherboard that fits your case, and install an AMD K6II-500 CPU.

Chas

This discussion is closed to new replies.