PC Anywhere causes memory dump in NT wor

Could be. However, there is not enough detail in your question.

Try downloading any available patches to the version you are running - patches are usually bug fixes and this may solve your problem.

As a last resort, you could always try ringing tech support! It's surprising how often a simple phone call can solve your problem.

Good luck

Make sure you are using the 32 bit version.

Probably not a video issue. As someone else mentioned, there is not a lot of detail. Is the "memory dump" a Dr Watson? or is it a Blue Screen Of Death? If it ia a BSOD, you coould use its contents as a guide to the process that is causing the problem.

Try removing the program and reinstalling the application from the original disks.

Could be a lot of things - video is just one. First, make sure you're using the newest version of PC Anywhere. Second, upgrade to at least NT-SP5. More detail on the exact situation would allow better answer - is Workstation the host or client? Whatare you trying to connect to?

I dont' have enough details but I had a smilar problem when I went to a machine that had a higher resolution setting than the system I was on could handle.

Like the others stated, not enough information. But, I use pcAnywhere with NT workstation daily and I too had a few problems at first, none of which were a video issue. Depending on what you are connecting to or from, try not to run many other apps with pcAnywhere connected unless you have a min of 96Mg of RAM. As you know NT is a memory hog, and pcAnywhere doesn't help. E-mail me with more detail and I am sure I can help you. Good Luck!

From my experince wit PC anywhere it's most likely a modem driver
Problem.

PCAnywhere 32 is a heavy drain on resources. Version 8 works well for us, but only after we moved up to 64mb of RAM. Whith 32mb we saw many hexidecimal "physical memory dumps".

This question was auto closed due to inactivity