7 replies
by chriswales
Run chkdsk /r from a boot disk to scan for, and correct any errors on the drive.
If you still cannot boot after doing this, it may be time to replace the drive.
by dklippert
by hard_yakka
It sounds like your master boot record is corrupted. This can be recreated using the command
fdisk /mbr
However, depending on the configuration of your drive this command may make the drive inaccessable. Requiring an OS reinstall. It should be used only after you have backed up all the data on the workstation and attempted other recovery methods. As a last resort it usually works.
When it doesn't work it is usually because an Antivirus product or other application (Viruses included) have modified the existing MBR.
by support
by aturay
To ensure that you do not loose any data you will want to download a copy of Knoppix (it's a ver. of linux that comes in a iso image that you need to burn - it's free @ www.knoppix.org). This will run from the CD so that you do not have to worry about having a second OS installed.
1. Boot from CD, once Knoppix is running 2. open a shell and run 3. Type "su" and press enter. (this makes you root)
4. Type "cfdisk" and press enter.
5. You will see all your partitions on your hard disk. They are e.g. hda1 (probably your C:), hda5 (D:) ... Check
those where filesystem is NTFS.
6. Write these down! You should then have a list like: hda1, hda5, hda6
7. Exit cfdisk.
8. Now type: "ntfsfix /dev/hda1" and press enter.
9. Do this and replace hda1 with all occurences on your list.
10. Close Knoppix and reboot.
Windows will boot up and it might take quite a long time while the screen is black. As long as the bluescreen does not come up, everything is okay.
This worked for me when I had a system crash with a corrupted ntfs.sys file. Everything was restored.
If Windows finally starts okay, you should be done.
by agapae5
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending