Discussion Locked

PDC/BDC

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

while installing windowsNT 4.0 server, there are 3 options

Stand alone ( member server )server
PDC
BDC

if i select , 1 st option, can i make that as a domain controller,

and if a windows NT4.0 server is running alrady ion a machine, howcan i find out, wheather it is a member server, pdc or BDC

9 replies

by erwin jansink

If you have installed the NT 4.0 machine as a stand alone, you will need to re-install the OS to make it a PDC or BDC. To find out what an NT 4.0 box is, go to Server manager, the PDC will have "Windows NT 4.0 Primary" listed next to it, the BDC will have "Windows NT 4.0 Backup".

by justanadmin

If you installed originally as a stand alone, you should be able to run the command "dcpromo" to promote the server to a PDC/BDC by using the start -> run dialog box.

Hope this helps.

by justanadmin

Synergy: Thanks for pointing out my oversight. Unfortunately, you are also incorrect that it is not possible. 3rd party utilities tend to make just about anything possible lately.

by curlergirl

"Justanadmin" is wrong - you cannot promote an NT4.0 standalone server to a PDC or BDC. The dcpromo utility is a part of Win2K ONLY, not NT4.0. With NT4.0, once you install NT as a standalone server it cannot become either a PDC or BDC unless you reinstall the operating system. Hope this helps!

This discussion is closed to new replies.