Security

Ask something
Discussion Locked

Pix 501 Internal Computer Setup

0 helpful
1 reply

by j_szelest

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
If I were to setup my Pix 501 as you described in "Set up a PIX 501 firewall from scratch" what are the correct network settings for a computer behind the firewall to be able to get outside for normal web surfing?

1 reply

by sour_craig

try this...

nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password "your password" encrypted
hostname "your host name"
domain-name "your domain name"
fixup protocol ftp 21
fixup protocol http 80

Other then that you will need to create an ACL (access control list) to allow that computer to access the internet.... so something like this would work...

access-list deny_out_inside permit tcp any any eq ftp
access-list deny_out_inside permit tcp any any eq 80
access-list deny_out_inside permit tcp any any eq 443

Hope this helps.....

This discussion is closed to new replies.