Discussion Locked

Plans to expand to multiple locations, LAN advice needed

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hey all,
Any advice would be greatly appreciated...
I'm not trained in anything, being still at school and only 17 but I do a lot of IT stuff for my dad's business. He has recently bought an office (previously worked from home) and wants me to adminster his network there. Additionally he has offices at other sites which total to about 3.
What I am looking at is setting up a new lan for the new ofice and then linking all offices by VPN. I know most of what Microsoft has to offer (we run 2000 and 2003 servers) and I have recently been learning linux (Mandrake and Clarkconnect).
I need advice on the best way to organise these offices so that they can share files etc. I can set up a VPN tunnel using PPTP on Mandrake 10 and am working on sharing this connection on each LAN. I think if I install a VPN server at the main (new) office and install VPN clients (all running Mandrake) at each other office, I will be able to create one big network. Is this the case? How would I go about setting up DNS and WINs servers? I figure I will need one primary DNS server at the main site and a secondary DNS server at each other site. Can these replicate through the VPN tunnel?

As if that isn't complicated enough, at the new office we will be leasing office space to other businesses, and they will require networking facilities. This includes networking between themselves, as well as access to our network ready printers. I thought that either subnetting or VLAN (if an inexpensive implentation can be found) to do this job. However, could these subnets access the printers while still providing security to our private network?

I am thinking of implementing IPs as follows
10.0.0.0 network 255.0.0.0 subnet
10 <-- network
10.0, 10.1, 10.2 <-- indicates which office
10.0.0, 10.0.1 <-- indicates whether server or workstation
10.0.0.1, 10.0.0.2 <-- indicates actual host
Is this a viable naming system?

Even if you can't answer all my questions, individual pieces of advice no matter how small will help to make my first major network implementation a successful one.

Thanks, Nicholas

5 replies

by jeremyhoughton

Hey there, drop me an email and I'll try to help you. A lot of what you say is going in a good direction but I have a few questions. So hit me up if you want some help. jeremyhoughton@yahoo.com

Also it's cool you are willing to help your dad and take on this project. Good job.

by davidpmartin

Your Dad sure has a lot of confidence in you!

I don't know what business your Dad is in, I just know that if I was him I would want maximum up time!

You meantion that your Dad is running W2K and W2003 servers, and yet you are talking about intermixing with Linux - I would ask you to seriously reconsider the mix - getting one O/S or the other is complicated enough without mixing two different O/S. If your Dad is working with a lot of MS applications and documents, I would recommend staying with MS. I know it might be tempting to experiment with the two different O/S, but the bottom line is that your Dad has a business to run, and might get a little annoyed at the down time caused by your "experimenting" with the mix and matching of different operating systems.

I guess the biggest thing that I would what to know is how many computers does your have at each site. Your are talking about using 10.0, 10.2 and 10.3 etc for your naming convention, and yet you meantion that you might have to 'share' the network with other users. If that is the case, then using either 172.16.x.x or 192.168.x.x addressing schemes on your private network might be better.

As far as VPN devices, if you Dad's business is small, and you only have a need for 50 simultanious connections, you might want to check out some of Linksys' new VPN offerings. You can get a 16 port VPN router capable of 50 simultaneous connections for only $400. Set these up at all of the sites, and you should be good to go - then if you want redundancy, spend an extra $400 for a spare VPN router, and you are in good shape.

Just some thoughts. Contact me at my e-mail address if you want some more advice (not too much though as I assume you are what you say you are - a 17 year old trying to help his Dad - and not someone posing as a way to get a bunch of free info - sorry I had to say that, but I've been burned on this before).

Dave

by nick_trask13

Thanks for the info Dave, and also Jeremy.
You make a good point about intermixing O/S. This is mainly because I always thought it better to spread server applications to reduce risk. If there isn't a problem running DNS, WINs, VPN and filesharing services from one W2000 server, maybe I should head in that direction.

When I said we would have to 'share' access, I meant that we will be providing network services to subletting clients, ie. internet access, access to network printers and possibly access to file storage.

As a general idea, there will be no more than 20 computers at each site now, however this will most likely grow over the next few years.

I had investigated a little with Linksys, as I heard it provided a cheaper way to Cisco quality. Would a VPN router like you suggested be able to provide full-time connectivity between all networks?

Once again, thankyou for your input and advice - every little bit counts.

Nicholas

by davidpmartin

Nick

The two Linksys VPN device you should look at is the Linksys RVO16 VPN router. It should meet all of your needs (and if you need to go above 16 ports you could 'hang' a couple of small linksys switches off a couple of the VPN router ports). The RV016 is capable of 50 simultaneous connections and is a 24/7 (always on) box. Using one of these at each site may be the way to go.

Dave

by nick_trask13

Thankyou to everyone for your useful advice, I'm currently looking at my options and making a decision on it. Will keep you updated for anyone who is interested.

Nicholas

This discussion is closed to new replies.