Question Locked

printer

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My HP PSC1610 all-in-one printer has a carriage jam which restarting will not clear. What can I do?

2 replies

by ozi eagle

Hi,

You most likely have a mechanical problem in the printer.

First check the paper path for any bits of paper that might be jammed causing the cariage to jam.

Second the rod on which the carriage moves could be gunged up. Try a few drops of light oil on it an, with the power off, gently move the carriage back and forth. It should be easy to move.
Clean the rod with a tissue and re lubricate with light oil.

Good luck.

Herb

This discussion is closed to new replies.