Discussion Locked

Printer configuration (any tips?)

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are purchasing a new printer for our office. There are 10 computers running NT with one server. Our current setup for printing is a HP 970. It's kind of like a personal printer but shared.

Now we are getting an HP 2100xi laser printer. I wantto know the best way to set this up so that it won't stall on me. I have been having a lot of printer problems lately. We can't afford to get the network card for the printer yet, so it will have to be shared. Should I put the spooler folder on a separate computer? What is the ideal setup for this printer? Any tips will be appreciated!

Casey

8 replies

by shmaltz

You dont have to buy a network card for the printer get a priter server instead and install it on the server.
There is one from HP its called jet direct.

by allan

The external print server is an option but it seems like the $ isn't there.
If the machine that the printer is connected to has more than one partition, put the spool on the second partition. You will probably still have printing issues because of the limited memory in the printer.
First priority would be to get the printer on the network and running from the server.
Second would be to add ram to the printer.

by caser85

You're right, we don't want to spend the money right now to get an external print server. We would be willing to upgrade the RAM in the printer though. I was also thinking, like you said, to put the spooler on a different partition. The printer comes with 4MB and is expandable to 52MB. Do you think adding 8Mb right away would make it run fairly smooth? It will surely be better than our current setup with a shared personal printer. Please advise.

by dle

Based on the size of your current network (10 client computers) you can get by with the printer connected directly to the server's LPT port. 8 MB is sufficient for standard word processing and spreadsheets. Go to 16 MB if you require more complex printing. Anything beyond that I think you will be wasting money.

As for the spooler location, it will depend on your current disk space and the amount of simulataneous print jobs that the server is expect to handle from your 10 users. Moving spooler location may not be necessary.

For better performance you may also want to take a look at the server's Network Properties - Server Service's Properties and set it for "Maximize Throughput for File Sharing".

This discussion is closed to new replies.