Discussion Locked

Printing from SCO Unix to Win98 box

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am connecting Windows 98 machines to a SCO Unix server. When running an application through Unix and I try to print from the Unix applicaion to a printer connected to a Win98 box it sometimes takes two, three and even four times sending the print job before it will print once. Printing through Windows prints every time. The printer is a HP 2100 deskjet connected to the Win98 box. Any clue as to why this works sometimes and others it will take several times before printing?

We are using SCO File & Printer server software to print. This has the NT software in it to print but still get the printing to fail SOMETIMES.

5 replies

by les

Sounds a bit strange that you've got the printer on a 98 box and then talk about having NT drivers in the SCO File and Printer sharing. If Sco is setup to use these drivers i am not surprised that it doesn't work.
Two other options you can try:
Use a generic hp laserjet driver for sco (maybe 5p) or setup samba for file and print sharing from unix boxes. Samba is easy to setup and works fine.

by sincas

If you are running SCO 5.0.2 or 5.0.0 and have the latest updates for AFSP to 3.5.2n, then i would look into any email returned from the printing jobs. Also, does the Win98 printer works from other machines.
If you have 5.0.4 or 5.0.5 or 5.0.6, i would recommond using Visionfs 3.10.905 with the 911 patch. This handles 2000 and XP much better.
I would also try "NET VIEW \\" to look for any physical networking problems.

This discussion is closed to new replies.